Opening Time:  Mon‑Sat  10:00 AM~06:00 PM

Industrial Reverse osmosis plants

Commercial RO Plants > Blogs > Industrial RO Plant Manufacturers > Industrial Reverse osmosis plants
Industrial Reverse osmosis plants

Reverse osmosis (RO) desalination is a water treatment method that uses membrane separation to produce fresh, low-salinity drinkable water from a saline water source (seawater or brackish water). Industrial Reverse osmosis plants Total dissolved solids (TDS), a water quality characteristic whose concentration is stated in milligrams per litre (mg/L), or parts per thousand, is often used to quantify the mineral/salt content of water (ppt).

For both big and small flows, reverse osmosis is particularly successful in treating brackish, surface, and ground water. Pharmaceutical, food boiler feed water, and beverage, metal finishing, and semiconductor production are a few examples of businesses that employ RO water.

By delivering clean, filtered water that can be utilised for both production and consumption, Industrial Reverse osmosis plants are a new technology that have shown to be beneficial for industrialists, housing societies, hostels & restaurants, and hospitals.

What is an Industrial RO Plant? 

An industrial RO (Reverse Osmosis) system is a manufacturing facility that uses reverse osmosis to purify polluted water. A range of pre-treatment techniques, including softening, dechlorination, and antiscalant treatment, are necessary for the Industrial RO Water plant.

For every cubic metre of water that is purified, an Industrial Reverse osmosis plants system uses 6 kilowatt hours of power.

What is Reverse Osmosis process?

Reverse osmosis (RO) is a useful technique that purifies water by desalinating it and filtering out all pollutants by applying pressure to a semipermeable membrane. Let’s first comprehend the osmosis process in order to fully comprehend the reverse osmosis procedure:

Osmosis is a natural process in which a liquid, such as water, travels through a semipermeable membrane that only permits some molecules, such as water, to pass through while preventing the passage of other molecules, such as salts and organic debris. In order to balance out the difference in salt content between the two solutions, liquids naturally pass across a membrane. Freshwater, a low-concentration solution, moves liquid toward seawater, a high-concentration solution. The Industrial RO plant has this reverse osmosis process as standard equipment.

We may push water molecules to move in the opposite direction across the semipermeable membrane from the salty saltwater side to the freshwater side by applying pressure to the highly concentrated solution, such as seawater.

Polymethacrylate, polyamides, and cellulose acetate are frequently used to create semip

What benefits can Industrial Ro Plants offer?

Due to the following advantages, it offers industrial RO plants are highly sought after:

Installation and maintenance are simple.

Reverse osmosis is a dependable method.

It eliminates high molecular weight organic matter, ionic salts, viruses, non-ionic, colloidal matter, active and inactive microorganisms, and non-ionic substances.

The system is entirely automated.

Industrial RO System Types:

1. Industrial RO Plant, 100 LPH

Small businesses, hospitals, hotels, schools, and other establishments can all benefit from a 100 LPH RO Plant. It is a powerful system with a 60% water recovery rate that can run for up to ten hours.

2.150 LPH RO System

150 litres of contaminated water per hour are filtered using a 150 LPH RO system. It is extremely effective and does not need routine maintenance. It uses less electricity and is energy-efficient.

3.200 LPH RO Plant

Suitable for medium-sized buildings, complexes, schools, etc. is the 200 LPH RO system. There was a sudden requirement for 400–500 personnel. It is simple to use and keep up with.

4. 250 LPH RO Plant

250 litres of tainted water are cleaned by a 200 LPH RO system. Low water Rejection Site is present. It doesn’t require any manual labour and is simple to use.

5.350 LPH RO Plant

Hotels, hospitals, food processing plants, and other facilities can use our 350 LPH RO Plant. It is a powerful system with a 70% water recovery rate that can run continuously for up to 10 hours.

6. 500 LPH Fully Automatic RO Plant

It can effectively handle the daily water needs of 800 to 1000 people. It is dependable for its operating performance and superb 500 litres per hour capacity with 6 filtering stages.


Industrial RO Water Plants are manufacturing facilities that use the most recent technology to effectively purify polluted water so that it may be used for a variety of industrial applications that call for desalinated water. For the plant to last for many years and produce water of the highest quality, proper monitoring and maintenance are essential. If you’re searching for an industrial RO plant, get in touch with Netsol water solutions to learn more.

The well-known brands like Netsol Water Solutions, hold 80% of the market for commercial RO plants. Most consumers are happy because they can easily obtain the services, at a required location. For any other support, inquiries, or product purchases, call on +91-9650608473 or email at

Leave a Reply